Ashen "Miley" 10 Watts Custom Tube Bass Guitar Amplifier Head Wood
Order your custom-built Ashen "Miley" 10 Watts Custom Tube Bass Guitar Amplifier Head.
The lead time is around four months.
This amplifier is perfect for home practice, small venues, or studio recording.
Introducing our low-powered tube bass amplifier head, perfect for practicing or recording at home without disturbing your family. Despite its seemingly modest power output, this bass amp delivers a full tube tone and a wide range of sounds in a portable package.
This amazing amplifier will be enclosed in an enclosure built of your favorite kind of wood. Please get in touch with us for available options and the correct pricing for your design.
Our unique amp circuit features Russian tubes from vintage TVs, ensuring a clean signal. With just three simple knobs (Gain, High, and Low), you can easily adjust the sound output to your preference. The amp's exceptional performance range (from under 40 Hz to 16 kHz) is comparable to the renowned Ampeg Portaflex Amps, known for their excellent low-frequency support.
Many musicians willingly invest thousands in tube preamps, but with our 'Miley' tube amp, you're not just getting a top-tier tube preamp – you're also receiving a premium low-powered amplifier that delivers authentic low frequencies, all housed in a custom-built enclosure tailored to your liking. And the best part? All of this comes at a significantly reduced price point. This is a must-have for any musician. Don't miss out on this exceptional value!
In addition to the speaker output, the amplifier features a balanced output for connecting low-impedance headphones instead of the speaker cabinet.
Connect the Ashen "Miley" head to your favorite speaker cabinet, which can produce those lows, and enjoy the experience.
We strive to craft our products to the highest standards possible, but as human artisans, our handmade items may exhibit variations compared to mass-produced goods, such as slight differences in dimensions, minor dents, scratches, or other imperfections. These are indicators of the product's artisanal origin. If you were to request a custom cabinet from another company, they might decline or charge a significantly higher price.
We endeavor to keep the prices of our handmade products as competitive as possible, taking into account potential cosmetic variations or minor imperfections. It's important to note that these imperfections do not affect the overall appearance or functionality of the product we create. By placing your order, you acknowledge and accept these conditions.
We offer a 3-year limited warranty, which is void in the following cases:
The product failure is due to misuse or lack of proper maintenance.
Alterations to the product, affecting its performance.
Ashen “Miley” Amplifier Head Specifications:
Class A hand-wired chassis
1 Channel
Power Handling: 6 Watts RMS, 10 Watts MAX
Speaker Impedance output: 4/8 Ohm
3 x 6N6P Russian dual triode power tube
2 x 6N2P tubes (preamp)
Control: Gain, High, Low
One Input, One Output
Dimensions: 9" H x 15" W x 7" D
Weight: 11 lbs
Made in the USA.
The lead time is around four months.
Thank you for visiting our website, and please don't hesitate to contact us with your questions.
Order your custom-built Ashen "Miley" 10 Watts Custom Tube Bass Guitar Amplifier Head.
The lead time is around four months.
This amplifier is perfect for home practice, small venues, or studio recording.
Introducing our low-powered tube bass amplifier head, perfect for practicing or recording at home without disturbing your family. Despite its seemingly modest power output, this bass amp delivers a full tube tone and a wide range of sounds in a portable package.
This amazing amplifier will be enclosed in an enclosure built of your favorite kind of wood. Please get in touch with us for available options and the correct pricing for your design.
Our unique amp circuit features Russian tubes from vintage TVs, ensuring a clean signal. With just three simple knobs (Gain, High, and Low), you can easily adjust the sound output to your preference. The amp's exceptional performance range (from under 40 Hz to 16 kHz) is comparable to the renowned Ampeg Portaflex Amps, known for their excellent low-frequency support.
Many musicians willingly invest thousands in tube preamps, but with our 'Miley' tube amp, you're not just getting a top-tier tube preamp – you're also receiving a premium low-powered amplifier that delivers authentic low frequencies, all housed in a custom-built enclosure tailored to your liking. And the best part? All of this comes at a significantly reduced price point. This is a must-have for any musician. Don't miss out on this exceptional value!
In addition to the speaker output, the amplifier features a balanced output for connecting low-impedance headphones instead of the speaker cabinet.
Connect the Ashen "Miley" head to your favorite speaker cabinet, which can produce those lows, and enjoy the experience.
We strive to craft our products to the highest standards possible, but as human artisans, our handmade items may exhibit variations compared to mass-produced goods, such as slight differences in dimensions, minor dents, scratches, or other imperfections. These are indicators of the product's artisanal origin. If you were to request a custom cabinet from another company, they might decline or charge a significantly higher price.
We endeavor to keep the prices of our handmade products as competitive as possible, taking into account potential cosmetic variations or minor imperfections. It's important to note that these imperfections do not affect the overall appearance or functionality of the product we create. By placing your order, you acknowledge and accept these conditions.
We offer a 3-year limited warranty, which is void in the following cases:
The product failure is due to misuse or lack of proper maintenance.
Alterations to the product, affecting its performance.
Ashen “Miley” Amplifier Head Specifications:
Class A hand-wired chassis
1 Channel
Power Handling: 6 Watts RMS, 10 Watts MAX
Speaker Impedance output: 4/8 Ohm
3 x 6N6P Russian dual triode power tube
2 x 6N2P tubes (preamp)
Control: Gain, High, Low
One Input, One Output
Dimensions: 9" H x 15" W x 7" D
Weight: 11 lbs
Made in the USA.
The lead time is around four months.
Thank you for visiting our website, and please don't hesitate to contact us with your questions.
Order your custom-built Ashen "Miley" 10 Watts Custom Tube Bass Guitar Amplifier Head.
The lead time is around four months.
This amplifier is perfect for home practice, small venues, or studio recording.
Introducing our low-powered tube bass amplifier head, perfect for practicing or recording at home without disturbing your family. Despite its seemingly modest power output, this bass amp delivers a full tube tone and a wide range of sounds in a portable package.
This amazing amplifier will be enclosed in an enclosure built of your favorite kind of wood. Please get in touch with us for available options and the correct pricing for your design.
Our unique amp circuit features Russian tubes from vintage TVs, ensuring a clean signal. With just three simple knobs (Gain, High, and Low), you can easily adjust the sound output to your preference. The amp's exceptional performance range (from under 40 Hz to 16 kHz) is comparable to the renowned Ampeg Portaflex Amps, known for their excellent low-frequency support.
Many musicians willingly invest thousands in tube preamps, but with our 'Miley' tube amp, you're not just getting a top-tier tube preamp – you're also receiving a premium low-powered amplifier that delivers authentic low frequencies, all housed in a custom-built enclosure tailored to your liking. And the best part? All of this comes at a significantly reduced price point. This is a must-have for any musician. Don't miss out on this exceptional value!
In addition to the speaker output, the amplifier features a balanced output for connecting low-impedance headphones instead of the speaker cabinet.
Connect the Ashen "Miley" head to your favorite speaker cabinet, which can produce those lows, and enjoy the experience.
We strive to craft our products to the highest standards possible, but as human artisans, our handmade items may exhibit variations compared to mass-produced goods, such as slight differences in dimensions, minor dents, scratches, or other imperfections. These are indicators of the product's artisanal origin. If you were to request a custom cabinet from another company, they might decline or charge a significantly higher price.
We endeavor to keep the prices of our handmade products as competitive as possible, taking into account potential cosmetic variations or minor imperfections. It's important to note that these imperfections do not affect the overall appearance or functionality of the product we create. By placing your order, you acknowledge and accept these conditions.
We offer a 3-year limited warranty, which is void in the following cases:
The product failure is due to misuse or lack of proper maintenance.
Alterations to the product, affecting its performance.
Ashen “Miley” Amplifier Head Specifications:
Class A hand-wired chassis
1 Channel
Power Handling: 6 Watts RMS, 10 Watts MAX
Speaker Impedance output: 4/8 Ohm
3 x 6N6P Russian dual triode power tube
2 x 6N2P tubes (preamp)
Control: Gain, High, Low
One Input, One Output
Dimensions: 9" H x 15" W x 7" D
Weight: 11 lbs
Made in the USA.
The lead time is around four months.
Thank you for visiting our website, and please don't hesitate to contact us with your questions.
